How To Use All Networks On Phone
APN or Access Point Proper name is an essential attribute of your mobile phone. It is commonly the bridge between your cellular network and the Internet. If your APN settings are incorrect, you lot may encounter problems using your internet, sending or receiving multimedia messages (MMS), cellular data connexion, or features such as Voice over LTE (VoLTE).
In most cases, the APN settings will automatically populate when y'all subscribe to a new carrier.
This article will briefly discuss the Admission Indicate Names and the APN settings for AT&T, Verizon, T-Mobile, Boost Mobile, United states of america Cellular, Sprint and Virgin Mobile. Below is a comprehensive list of APN settings for all Us carriers.
Updated List of APN settings for all Carriers
Before we can go on with the APN settings for all carriers, hither is how to manually set a new APN Settings (Config) for any of the network providers mentioned below:
For Android :
- Navigate to Settings
- Tap Connections.
- Tap Mobile Networks
- Select Admission Point Names
- Tap More than (3 dots)
- Tap Reset to Default.
- And so enter the new APN Settings.
For iPhone :
- Navigate to Settings
- Tap Cellular Data Network
- Then enter the new APN Settings
Keep scrolling to get the APN settings for your carrier.
AT&T APN Settings for Apple Devices
Beneath are the AT&T APN settings for Apple devices, including iPhone, Apple Lookout man and iPad.
AT&T APN Settings for iPhone
- Name: NXTGENPHONE
- APN: NXTGENPHONE
- Proxy: not set
- Port: not prepare
- Username: not set
- Password: non set
- Server: not set
- MMSC: http://mmsc.mobile.att.cyberspace
- MMS proxy: proxy.mobile.att.cyberspace
- MMS port: 80
- MCC: 310
- MNC: 410
- Authentication blazon: None
- APN type: default,mms,supl,hipri
- APN Protocol: IPv4
- Bearer: Unspecified
AT&T APN Settings for iPad
- Proper name: ATT Broadband
- APN: Broadband
- Proxy: not prepare
- Port: not fix
- Username: non gear up
- Countersign: non set
- Server: not set up
- MMSC: not fix
- MMS proxy: not set
- MMS port: not set
- MCC: 310
- MNC: 410
- Authentication type: None
- APN blazon: default,MMS,supl,hipri,fota
- APN Protocol: Enabled
- Bearer: Unspecified
AT&T APN Settings for Apple Sentry
- Name: Phone
- APN: Phone
- Proxy: not set
- Port: non ready
- Username: non set
- Countersign: not gear up
- Server: not set
- MMSC: not set
- MMS proxy: not set
- MMS port: not ready
- MCC: non set
- MNC: not set up
- Hallmark blazon: None
- APN blazon: not set
- APN Protocol: not set
- Bearer: Unspecified
AT&T APN Settings for Android Devices
Below are the AT&T APN settings for Android devices, including Smartphones, Tablets and Smartwatches.
AT&T APN Settings for Android Smartphones
- Name: NXTGENPHONE
- APN: NXTGENPHONE
- Proxy: not fix
- Port: not fix
- Username: not prepare
- Countersign: not set
- Server: non set
- MMSC: http://mmsc.mobile.att.cyberspace
- MMS proxy: proxy.mobile.att.net
- MMS port: 80
- MCC: 310
- MNC: 410
- Authentication type: None
- APN blazon: default,mms,supl,hipri
- APN Protocol: IPv4
- Bearer: Unspecified
AT&T APN Settings for Android Tablets
- Proper noun: ATT Broadband
- APN: Broadband
- Proxy: not set up
- Port: not set
- Username: not fix
- Countersign: non set
- Server: not gear up
- MMSC: not set
- MMS proxy: non set
- MMS port: not set
- MCC: 310
- MNC: 410
- Hallmark blazon: None
- APN type: default,mms,supl,hipri,fota
- APN Protocol: Enabled
- Bearer: Unspecified
AT&T APN Settings for Android Smartwatches
- Name: Phone
- APN: Telephone
- Proxy: not gear up
- Port: non set
- Username: not gear up
- Password: non fix
- Server: not set
- MMSC: non set
- MMS proxy: not prepare
- MMS port: not set
- MCC: not fix
- MNC: not set
- Hallmark type: None
- APN blazon: non set up
- APN Protocol: not set up
- Bearer: Unspecified
AT&T APN Settings for Android 5G (Standalone-Capable) Phones
- Proper noun: NRPHONE
- APN: NRPHONE
- Proxy: non set
- Port: not set
- Username: not set
- Password: not set
- Server: not ready
- MMSC: non gear up
- MMS proxy: non fix
- MMS port: not set
- MCC: 310
- MNC: 410
- Authentication blazon: None
- APN type: default,mms,supl,hipri,fota
- APN Protocol: Enabled
- Bearer: Unspecified
AT&T APN Settings for Android 5G (Capable) Phones
- Name: ENHANCEDPHONE
- APN: ENHANCEDPHONE
- Proxy: not set
- Port: non set up
- Username: non fix
- Password: not set
- Server: not set
- MMSC: http://mmsc.mobile.att.net
- MMS proxy: proxy.mobile.att.net
- MMS port: 80
- MCC: 310
- MNC: 410
- Authentication type: None
- APN type: default,mms,supl,hipri
- APN Protocol: IPv4
- Bearer: Unspecified
AT&T APN Settings for Windows Phones
Cellular Information or Net Access
- APN: NXTGENPHONE
- Proxy Server: non prepare
- Proxy Port: non set
- Username: not set
- Countersign: not set
- Proxy Server: not gear up
- APN blazon: IPv4v6
Multimedia Message Service (MMS)
- APN: NXTGENPHONE
- Proxy Server: not set up
- Proxy Port: not set
- Username: not set
- Password: not set
- Proxy Server: not set
- IP type: IPv4v6
- WAP Gateway: proxy.mobile.att.net
- WAP Gateway Port:80
- MMSC: http://mmsc.mobile.att.internet
- Maximum bulletin size: 600K
T-Mobile APN Settings for Android Devices
Below are the T-Mobile APN settings for Android devices, including Smartphones, Tablets and Smartwatches.
- Proper noun: T-Mobile
- APN: Fast.t-mobile.com (for LTE devices) or epc.tmobile.com (for non-LTE devices)
- Proxy: <Non set up>
- Port: <Not set>
- Username: <Not gear up>
- Password: <Non set>
- Server: <Not prepare>
- MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
- MMS proxy: <Non set>
- MMS port: <Not ready>
- MMS protocol: WAP two.0
- MCC: 310
- MNC: 260
- Authentication Blazon: <Not set>
- APN Type: default,supl,mms OR Internet+MMS
- Default Android provides a text field to enter: default,supl,mms.
- Samsung provides an Internet+MMS radio push button to select.
- APN Protocol: IPv4/IPv6
- APN roaming protocol: IPv4/IPv6 or IPv4 only when roaming internationally
- Turn APN on/off: Grayed out unless there are multiple APNs
- Bearer: Unspecified
T-Mobile APN Settings for iPhone
For iPhones running iOS half-dozen :
Under Cellular Data :
- APN: fast.t-mobile.com
- Username: <Not prepare>
- Password: <Not set>
Nether MMS :
- APN: fast.t-mobile.com
- Username: <Not set>
- Countersign: <Not fix>
- MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
- MMS Proxy: <Non set up>
- MMS Max Message Size: 1048576
- MMS UA Prof URL: http://world wide web.apple.com/mms/uaprof.rdf
Nether Cyberspace Tethering :
- APN: pcweb.tmobile.com
- Username: <Non set>
- Password: <Non gear up>
For iPhones running iOS vii & 8 :
Under Cellular Data :
- APN: fast.t-mobile.com
- Username: <Not set>
- Countersign: <Non set>
Under MMS:
- APN: fast.t-mobile.com (for iOS 7) or tmus (for iOS 8)
- Username: <Non set>
- Password: <Not set>
- MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
- MMS Proxy: <Not set>
- MMS Max Bulletin Size: 1048576
- MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
Under LTE Setup:
- APN: <Not prepare>
- Username: <Non set>
- Password: <Non set>
Under Personal Hotspot:
- APN: pcweb.tmobile.com
- Username: <Not set>
- Password: <Non set up>
For iPhones running iOS 9 or newer:
The APN Settings are automatically populated one time you insert a valid T-Mobile Sim Card. You may also reset these values past resetting your network settings.
- Navigate to Settings
- Tap General.
- Tap Transfer or Reset iPhone
- Tap Reset.
- Tap Reset Network Settings.
Default / Fallback T-Mobile APN Settings
Consider using these if the above APN settings did not work or for other phones like Windows and Basic Phones.
Internet, Picture Messaging and MMS:
- Admission Point Proper name (APN): fast.t-mobile.com
- MMSC Server: http://mms.msg.eng.t-mobile.com/mms/wapenc
Brusk Message Service (SMS) :
- SMS Email:10digitmobile@tmomail.net
- SMS center: 1-206-313-0004
- Email center: 500
- Voicemail : 1-805-637-7243 (1-805-MESSAGE)
Verizon APN Settings
Below are the Verizon APN settings for iPhone and Android Devices.
Verizon APN settings for iPhone and Android Devices (LTE)
- Name: Verizon
- APN: vzwinternet
- Proxy: <Not gear up>
- Port: <Not prepare>
- Username: <Not ready>
- Password: <Not set>
- Server: <Not set>
- MMSC: http://mms.vtext.com/servlets/mms
- MMS proxy: <Not prepare>
- MMS port: 80
- MMS protocol: <Not prepare>
- MCC: 310
- MNC: 12
- Hallmark Type: <Non ready>
- APN Type: default,supl,mms OR Net+MMS
- APN Protocol: <Non prepare> Or IPv4
- APN roaming protocol: <Non set>
- Bearer: Unspecified
Notes:
vzwims: Used for connections to IMS services. Required for TXT messaging.
vzwadmin: Used for administrative functions.
vzwinternet: Required for full general Internet connections.
vzwapp: Required for PDA information service.
Dart APN Settings
Beneath are the Sprint APN settings for iPhone and Android Devices.
Sprint APN settings for iPhone and Android Devices
- APN Name: Sprint
- APN: cinet.spcs
- Proxy: <Not Prepare>
- Port: <Not Set>
- Username: <Non Set>
- Password: <Not Ready>
- Server: <Non Set>
- MMSC: http://mmsc1.uscc.net/mmsc/mms
- MMS proxy: 68.28.31.7
- MMS port: <Not Set>
- MCC: 234
- MNC: xv
- Authentication type: <Not Set>
- APN type: MMS
- APN Protocol: iPv4
- Bearer: <Not Fix>
Sprint Alternative APN settings
- APN Name: Sprint
- APN: cinet.spcs
- Proxy: <Not Ready>
- Port: <Not Set>
- Username: <Non Prepare>
- Password: <Not Gear up>
- Server: <Not Set>
- MMSC: https://mms.sprintpcs.com/servlets/mms
- MMS proxy: 68.28.31.7
- MMS port: 80
- MCC: 310
- MNC: 120
- Authentication type: <Not Fix>
- APN blazon: MMS
- APN Protocol: iPv4
- Bearer: <Not Set>
Boost Mobile APN Settings
Below are the Boost Mobile APN settings for iPhone and Android Devices.
- Name – Boost
- APN – boost.data
- MMSC – http://sprboost.mmsmvno.com / mms/ wapenc
- APN Blazon – default,supl,mms
- APN Protocol – IPv6
- APN Roaming Protocol – IPv4
- APN enable/disable – Enabled
- MCC:310
- MNC:240
- MVNO Type: GID
- MVNO Type:6230
Boost Mobile Alternative APN Settings
- Name – Heave Mobile
- APN – Boost_Mobile
- MMSC – http://mm.myboostmobile.com
- APN Type – default,supl,mms, supl,hipri,fota,admin
- APN Protocol – IPv6
- APN Roaming Protocol – IPv4
- APN enable/disable – Enabled
- MCC:310
- MNC:870
- MVNO Blazon: GID
- MVNO Type:6230
- USERNAME: Boost_Mobile
- MMS Port: lxxx
- MMS Proxy: 68.28.31.7
United states of america Cellular APN Settings
Beneath are the U.s. Cellular APN settings for iPhone and Android Devices.
- NAME: USCC
- APN: cyberspace
- Proxy: <Not Fix>
- Port: <Non Set>
- Username: yourMSID@uscc.net
- Countersign: your MSID
- Server: wap.voicestream.com
- MMSC: http://mmsc1.uscc.net/mmsc/mms
- MMS proxy: bare
- MMS port: fourscore
- MCC: 310
- MNC: Will differ in different regions, for instance 120
- Hallmark type: <Not Set up>
- APN type: <Not Ready> or Net + MMS
- APN Protocol: iPv4
- Bearer: <Non Set>
Virgin Mobile APN Settings
Below are the Virgin Mobile APN settings for iPhone and Android Devices.
Virgin Mobile APN settings for Android Devices
- Proper noun: Virgin Internet
- APN: goto.virginmobile.uk
- Username: user
- MMSC: http://mms.virginmobile.co.united kingdom:8002
- MMS Proxy: 193.xxx.166.2
- MMS Port: 8080
- Authentication Type: PAP
- APN Type: internet+mms
Virgin Mobile APN settings for iPhone
Under Cellular Information :
- APN: goto.virginmobile.united kingdom of great britain and northern ireland
- Username: user
Nether MMS:
- APN: goto.virginmobile.uk
- Username: user
- MMSC: http://mms.virginmobile.co.uk:8002
- MMS Proxy: 193.30.166.ii:8080
- MMS Max Message Size: 1048576
Virgin Mobile APN settings for Windows Phone
Cyberspace APN:
- Profile proper name: Virgin Internet
- APN: goto.virginmobile.uk
- Username: user
Add MMS:
- Profile name: Virgin MMS
- APN: goto.virginmobile.united kingdom of great britain and northern ireland
- Username: user
- Proxy server: 193.30.166.ii
- Proxy Port: 8080
- MMSC (URL): http://mms.virginmobile.co.uk:8002
- Maximum MMS size: 1048576
What is an APN?
APN or Access Point Proper name is a gateway between a mobile GSM, GPRS, 3G and 4G mobile network and another reckoner, frequently the public Internet.
What is a Proxy?
Proxy is an optional field that states the HTTP proxy accost; this field is normally left blank. Information technology acts as an intermediary between a client requesting a resource and the Server providing that resources.
What is a Port?
Port is a communication endpoint. This apply is in line with the Proxy.
What are the Username and Password?
Username and password are optional fields, simply they are sometimes used to authenticate the connection between the mobile network provider and the phone using its network.
What is the Server?
The Server is also blank in most situations.
What is an MMSC?
MMSC (Multimedia Messaging Service Heart) is a telecom carrier'southward MMS store and forward server.
What are the MMS Proxy and MMS Ports?
MMS Proxy and MMS Port allow you to configure an HTTP proxy for MMS messages.
What are MCC and MNC?
MCC stands for Mobile Land Code and MNC is Mobile Network Lawmaking. They are compulsory fields and every land has its own unique code.
For instance, the USA has MCC betwixt 310 and 316. The MNC also differs from region to region in the aforementioned area.
What is the Authentication Blazon?
Authentication Types have options such as CHAP, PAP, PAP, CHAP and None.
What is the APN Type?
Again, the APN Type is a compulsory field specifying the data connection type. The values used in this field are Internet, MMS or BOTH.
How To Use All Networks On Phone,
Source: https://www.technobezz.com/list-apn-settings-carriers-android-phone/
Posted by: willardpulty1935.blogspot.com

0 Response to "How To Use All Networks On Phone"
Post a Comment